Nac Policies; Overview - HP 800 User Manual

NAC Policies

Overview

NOTE:
6-2

Overview

"NAC policies" are collections of tests that evaluate remote endpoints attempt-
ing to connect to your network. You can use the standard tests installed with
NAC 800, or you can create your own custom tests.
The default NAC policy is indicated by the check mark on the icon to the left
of the NAC policy name. See "Selecting the Default NAC Policy" on page 6-7
for instructions on selecting and charging the default NAC policy.
The NAC policies window (shown in figure 6-1) is where you create NAC
policies and groups, disable NAC policies, delete NAC policies, access specific
NAC policies. Once you access a specific policy, you can perform the following
tasks:
Basic settings – Edit NAC policies, assign NAC policies to a group,
■
enable or disable the NAC policy, select which OSs are not tested, but
allowed access, set retest frequency, and set quarantine times.
Domains and endpoints – Assign endpoints and domains to a policy.
■
Tests – Select tests, select test properties, select test failure actions.
■
To view the NAC policies window:
NAC 800 Home window>>NAC policies