Table of Contents
Advertisement
DAY/NIGHT
You can display pictures in color or in black and white.
1.
When the SETUP menu screen is displayed,
select 'DAY/NIGHT' by using the Function
Setup button so that the arrow indicates
'DAY/NIGHT'.
2.
Select a desired mode using the Function
Setup button according to the picture display
you want.
AUTO : The mode is switched to 'Color' in a
normal environment, but switches to
'B/W' mode when ambient illumination
is low. To set up the switching
time for AUTO mode, press the set
button. You can turn on or off the
burst signal on B/W mode.
-
BURST MODE : You can turn on or
-
DURATION : You can select the day/
-
DWELL TIME : You can select day/
(PAL MODEL)
Color
Fast
2 lux
Slow
1 lux
The day/night switching point of the camera can be adjusted.
EXTERN : Ground to the grounding terminal to allow automatic switching
between COLOR and B/W (Black/White).
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
off the burst signal
on B/W mode.
night switching point.
night switching delay time from.
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
B/W
B/W
Color
5.5 lux
7 lux
MAIN SETUP
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
6. SSNR3
7. DAY/NIGHT
8. SPECIAL
9. EXIT
AUTO SETUP
▶ 1.BURST MODE
2.COLOR→B/W
DURATION
DWELL TIME
3.B/W→COLOR
DURATION
DWELL TIME
4.RETURN
(NTSC MODEL)
Color
B/W
Fast
2 lux
Slow
1 lux
DC
OFF
ATW
OFF
ON
AUTO
SAVE
ON
FAST
5 SEC
FAST
10 SEC
B/W
Color
5 lux
5.5 lux
English_29
Advertisement
Table of Contents
