Table of Contents
Advertisement
-
MANUAL : You can control shutter speed manually.
(NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL - 1/50sec~1/
120,000sec)
-
A.FLK : Select this when you experience picture fl icker, this happen when
there is a clash with the installed lighting frequency.
-
EXTERN : Use the Shutter Speed Select Terminal on the back of the
camera to control the shutter speed via an external input. You can control
the desired speed as shown in the table below by connecting the terminal
to the Ground Terminal.
1/60(1/50)
1/120(1/100)
1/250
1/500
1/700
1/1000
1/1600
1/2500
-
--- : Shutter speed is fi xed at 1/60 sec (1/50 sec).
M
When you use a DC lens, set the shutter mode to --- if color rolling occurs.
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture
may become unstable if the camera faces a bright fl uorescent light. Therefore, take care when
choosing the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
When using an external input, Connect the Shutter Speed Select Terminal to the Ground
Terminal.
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen
-
OFF : Deactivates the AGC function.
-
LOW : Allows automatic gain control from 5.3dB to 32dB.
-
HIGH : Allows automatic gain control from 5.3dB to 37dB.
SHUTTER 1
SHUTTER 2
OFF
ON
OFF
ON
OFF
ON
OFF
ON
[ Interlace Mode]
- but the greater the noise.
SHUTTER 3
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
ON
OFF
ON
ON
ON
ON
ON
English_25
Advertisement
Table of Contents
