AY-ZP35PR
5. IPM check method
Turn off the power, let the large capacity electrolytic capacitor (C10) discharge completely, and dismount the IPM. Then, using a tester, check leak
current between C and E.
When using a digital tester, the (+) and (-) tester lead wires in the table must be reversed.
Needle-type tester
Normal resistance value
(-)
(+)
P
N
(several M )
U
V
W
5.1. IPM internal circuit diagram
Needle-type tester
(-)
(+)
U
N
V
W
Values in ( ) are for digital tester.
3-10
Normal resistance value
(several M )