Table of Contents
Advertisement
28
EN
Edit From A
Camcorder
Recorder
AUDIO
input
VIDEO
input
Audio cable (not provided)
Video cable (not provided)
VIDEO OUT
Camcorder
AUDIO OUT
Player
You can use a camcorder as the source player and your
recorder as the recording deck.
A
Make connections.
Connect the camcorder's AUDIO OUT and VIDEO OUT
connectors to the recorder's front panel AUDIO and
VIDEO input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
B
Set the recorder's input mode.
Press AUX (number key "0") and/or PR to select "F-1".
C
Set the edit mode.
See "PICTURE CONTROL" on page 37.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
EDITING
Advertisement
Table of Contents
