18
EN
Basic Recording
Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (
pg. 19) or timer recording (
recording will resume automatically when power is restored
to the recorder unless the recorder's memory backup has
expired.
NOTE:
If a power outage exceed the recorder's memory backup
time, Recording Resume Function does not work.
A
Insert a cassette with the record safety tab intact.
The recorder's power comes on automatically and the counter
is reset to 0:00:00.
B
Press PR +/– or the number keys to select the channel
you wish to record.
C
Press SP/LP (
front display panel or TV screen. Press SP/LP (
to change the setting while the tape speed is displayed on
the TV screen.
D
Press and hold
press
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
E
Press
F
Press
Then press
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
pg. 22, 24), the
Load a cassette.
Choose a programme.
Set the tape speed.
p
). The current setting appears on the
Start recording.
7
4
and press
7
on the recorder.
Pause/Resume recording.
9
4
. Press
to resume recording.
Stop recording.
8
on the remote control or
0
to remove the cassette.
Record safety tab
RECORDING
p
) again
on the remote control, or
pg. 21)
0
on the recorder.