Panasonic KX-TD500 Installation Manual page 193

4.2 Diagnosis
Note
• Test items which apply to the card vary depending on the card type.
Dim-displayed test items are not available for the selected card type.
[Card Test]
a)
Click
• "Card Test" screen is displayed.
b)
Click
• After executing the test, the test result is displayed.
Note
• After executing (or canceling) the Card Test, go back to "Diagnosis - Card Information"
screen by pressing Close (or Cancel) button and change the card status from "OUS (Out-
of-Service)" to "INS (In-Service)".
• Executing the DISA card test erases the pre-recorded OGM and a beep tone will be
recorded automatically instead of the OGM.
• When executing the T1 card test, set the DIP Switch on the T1 card to "TEST" position.
Item
Card
Result
194
.
.
Example: When a T1 card is installed in the Slot No. 101.
Table 34: Description
Display
Card No. : Type
OK, NG
Description
The card number and the type of the target
card to be diagnosed. (The card specified in
"Card Information" screen is displayed
automatically.)
The results of diagnosis.
Figure 163:
Utility