Operational Mode; Interactive Programming - On-Site - Panasonic KX-TD500 Installation Manual

3.5 Operational Mode

3.5.1 Operational Mode
System Programming can be done either in Interactive or Batch mode.
Interactive programming can be done either at On-site or by Remote.
Interactive programming mode
Two-way communications between the KX-TD500 and a PC are taking place in real time. This
provides the PC user with direct, immediate responses from the KX-TD500 system.
Batch Processing mode (Noninteractive)
In batch processing, all the data to be input is collected together before being processed
together as a batch data.
Batch programming can be done by PC alone. No connection with the KX-TD500 System is
required. The KX-TD500 System receives a batch transmission (upload) and has no need to
respond to it.

3.5.2 Interactive Programming - On-site

Operation
1.
Point to "Connection" in the Main Menu and click.
• The "Connection" drop-down menu is displayed.
2.
Click "Local" in the drop-down menu.
• "Local Connect" screen is displayed.
3.
Enter the appropriate communication parameters and the System Programming password.
4.
Click
Maintenance Console Guide
.
3.5 Operational Mode
Figure 152:
179