2.10 Starting Up the KX-TD500 System
2.10.1 System Power-Up Procedure
Complete and check all installation procedures before connecting the AC power supply cable
(packaged separately).
1.
First insert the AC power supply cable into the AC power supply cable connector on the
back of the base shelf as shown below.
2.
Then insert the other end of the AC power supply cable into the AC outlet.
3.
Turn on the Main Power Switch on the base shelf.
4.
Turn on the power switch on the power unit of each expansion shelf.
• The power indicator on the power unit will light.
5.
Turn on the power switch on the power unit of basic shelf.
Note
Each shelf may be powered down individually, without powering down the entire system.
Installation
2.10 Starting Up the KX-TD500 System
Figure 123:
151