Panasonic DBS576 Section 700 Technical Manual page 95

Section 700 - Operation
Operation
To set the Message Key ID code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 06.
3. Press the HOLD key.
4. Press the HOLD key.
5. Dial the extension number of the phone being programmed.
6. Press the HOLD key.
7. Enter the Message Key ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or existing data, press the FLASH key.
8. Press the HOLD key to store the entry.
9. To set additional Message Key ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
10. Repeat steps 7-9 until all Message Key ID codes are set.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
576-20-700
Action
DBS 576 (USA), issued January 1999
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8106-
MSG Key ID Code displays
MSGID-EXT Number displays
MSG-ID EXT XXX displays (where
XXX = extension number)
Next extension number displays
Desired extension number displays
MSGID - EXT Number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
95