Did/Dnis/Ddi Voice Mail Id Code - Panasonic DBS576 Section 700 Technical Manual

Section 700 - Operation
To clear the ID Code:
1. Go offhook or press ON/OFF key.
2. Dial the Call Forward ID Code (default = 715)
3. Press the HOLD key.
4. Go onhook or press ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

DID/DNIS/DDI Voice Mail ID Code

DID/DNIS/DDI calls may be sent directly to voice mail through the used of the DID Voice Mail ID
Code. A prefix and suffix may be specified to be sent to the voice mail as well as a chosen number of
DID digits.
Either no digits (default), the last two digits of the DID, the last three digits of the DID or the entire
DID number may be sent.
The prefix may be up to eight digits including 0-9, *, # and pause (REDIAL).
The suffix may be up to eight digits including 0-9, *, # and pause (REDIAL).
Hardware Requirements
• N/A
Related Programming
• FF1-4-06: DID Number Automatic Send to VM
• FF1-4-06: VM ID Code Prefix
• FF1-4-06: VM ID Code: Suffix
Considerations
• Each pause is a fixed 1 second delay.
• If you do not assign a Voice Mail ID Code, the DID digits will be sent to voice mail.
• Only one Voice Mail ID Code is available for the system.
576-20-700
Action
DBS 576 (USA), issued January 1999
Chapter 3. System Features
Result
Enter V.M. ID displays
Cleared V.M. ID displays
73