Camp-On (Call Waiting); Camp-On (Call Waiting) - Panasonic DBS576 Section 700 Technical Manual

Section 700 - Operation

Camp-On (Call Waiting)

CPC-96, CPC-288, and CPC-576 All Versions
Description
If you dial a busy extension, you can camp onto that extension and send a Call Waiting signal to the
called party. The called party then needs only to replace the handset and pick it up again to be
automatically connected to the new call. The called party can also press the HOLD key to place the
first call on hold and then answer the waiting call.
The System provides two types of call waiting:
• Automatic Call Waiting: You do not need to enter a code to send the Call Waiting signal to
the busy extension. You need only to remain on the line.
Manual Call Waiting: You must enter a code to send a Call Waiting signal to the busy
•
extension.
Operation
To set Automatic Camp-on:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Remain on the line until the called party answers.
To set Manual Camp-on:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the Camp-on (Call Waiting) code (default = 2).
4. Remain on the line until the called party answers.
To answer a Camp-on (Call Waiting) signal:
1. Replace the handset or press the ON/OFF key.
2. Lift the handset or press the ON/OFF key again to be con-
nected to the waiting call.
OR....
Press the HOLD key.
576-20-700
Action
Action
Action
DBS 576 (USA), issued January 1999
Chapter 6. DSLT Features
Result
Intercom dial tone
• Called party hears alert tone
• Calling party hears ringback tone
Result
Intercom dial tone
Busy tone
• Called party hears alert tone
• Calling party hears ringback tone
Result
• Current call placed on hold
• Connected to waiting call
241