→
Dialing Mode
→
DTMF Width
→
Pulse Speed
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
→
CO Dial Mode
→
DTMF Width
→
CO Pulse Speed
PT Programming Manual References
[410] LCOT Dialing Mode
[411] LCOT Pulse Rate
[412] LCOT DTMF Minimum Duration
4.1.3 Dial Tone
Description
The following dial tones inform extension users about features activated on their extensions:
Each dial tone type has two frequencies, such as dial tone 1A and dial tone 1B.
Type
Tone 1A/1B
Tone 2A/2B
Tone 3A/3B
Document Version 2008-11
A normal dial tone is heard when:
a.
No features listed for dial tones 2 through 4 has been set, or
b.
Automatic Route Selection (ARS) is used.
This tone is heard when:
•
There are messages that have previously been listened to and no new
messages on the SVM card.
•
Any of the features below are set.
•
Absent Message
•
BGM
•
Call Forwarding (FWD)
•
Call Pickup Deny
•
Call Waiting
•
Do Not Disturb (DND)
•
Extension Dial Lock
•
Executive Busy Override Deny
•
Hot Line
•
Timed Reminder
This tone is heard when:
•
A called PS is being searched for.
•
The recording time used by the Simplified Voice Message (SVM) feature
reaches the limit.
*1
•
Any of the features below are performed.
•
Account Code Entry
•
Consultation Hold
•
Answering a Timed Reminder call with no message
Description
*1
4.1.3 Dial Tone
Feature Manual
69