Panasonic KX-TDA50G Feature Manual page 173

Service
Calling Line Identification
Presentation (CLIP)
Connected Line
Identification
Presentation (COLP)
Calling Line Identification
Restriction (CLIR)
Connected Line
Identification Restriction
(COLR)
Caller ID
3.
Private Networking Connection (QSIG)
Private networking with QSIG is possible using an ISDN line. Each ISDN port must be programmed so that
each ISDN line has a "master" connection and a "slave" connection.
Conditions
•
En bloc
The PBX sends all of dialed digits at once after the extension user completes dialing. The PBX recognizes
the end of dialing as follows:
–
the # key is pressed (programmable).
4.17 [2-9] System Options—Option 2—
(KX-TDA100/KX-TDA200/KX-TDA600 only)
–
the dialed number is a preprogrammed telephone number.
5.4 [3-1-4] Dialing Plan
–
the inter-digit timer expires.
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
•
Extension Number
An extension number can be assigned to each ISDN port.
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
•
Network Type
Each ISDN port can be set to the requirements of each country/area.
•
L1 Active Mode and L2 Data Link Mode
The active mode of Layer 1 (L1) and the data link mode of Layer 2 (L2) can be selected individually
(Permanent or Call by Call) for each ISDN port.
•
TEI Assignment Mode
The Terminal Endpoint Identifier (TEI) assignment mode can be selected for each ISDN port.
•
Bearer Mode
The bearer mode can be assigned for each ISDN port.
6.1 [4-1-1] Wired Extension—Extension Settings—Option 6—
KX-TDA600 only)
Document Version 2008-11
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Description
Sends the caller's telephone number to the
network when making a call. The called party can
see the number on his or her telephone display
before answering the call.
Sends the telephone number of the answered party
to the network when answering a call. The caller
can see the number on his telephone display when
the line is connected.
Prevents the caller's CLI from being presented to
the called party.
Prevents COLP from being sent by the answered
party.
The PBX receives Caller ID information, such as
the caller's name and telephone number, when a
call is sent from the network. A display proprietary
telephone (PT) user can see this information
before answering the call.
End of Dial Plan—[#] as End of Dial for en Bloc mode
® 3.1.13 CLIP
(Calling Line
Identification
Presentation)
® 3.1.1 Caller ID
Dial—Extension Inter-digit
Extension Number
ISDN Bearer (KX-TDA100/KX-TDA200/
Feature Manual
Details in
173