Confirmation Tone - Panasonic KX-TDA50G Feature Manual

3.1.17 Confirmation Tone

Installation Manual References
KX-TDA50
2.5.2 ECHO8 Card (KX-TDA5166)
KX-TDA100/KX-TDA200
2.6.4 ECHO16 Card (KX-TDA0166)
KX-TDA600
2.8.6 EECHO16 Card (KX-TDA6166)
PC Programming Manual References
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Unattended Conference—Recall Start Timer
→ Unattended Conference—Warning Tone Start Timer
→ Unattended Conference—Disconnect Timer
4.11 [2-7-1] Class of Service—COS Settings—TRS—
4.17 [2-9] System Options—Option 3
→ Confirmation Tone—Tone 4-1 : Start Conference
→ Confirmation Tone—Tone 4-2 : Finish Conference
→ Echo Cancel—Conference
6.5 [4-1-4] Wired Extension—Flexible Button—
6.13 [4-2-3] Portable Station—Flexible Button—
6.17 [4-3] DSS Console—
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.15 Conference
3.1.17 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.
Type
Tone 1
Tone 2
60 Feature Manual
Type
Type
a.
Sent when the setting is accepted.
b.
Sent when a call is received in voice-calling mode (Alternate Receiving—
Ring/Voice). The caller's voice will be heard after the tone.
a.
Sent from an external paging device or an extension before being paged.
b.
Sent when a call is received while an extension is in Hands-free Answerback
mode.
Transfer to CO
Type
Description
Document Version 2008-11