Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung SRV-940
Summary of Contents for Samsung SRV-940
- Page 1 Digital Video Recorder User’s Manual...
-
Page 2: Table Of Contents
2.2.1 Control panel on the front ·········································································································9 the consent of Samsung Techwin, Inc. is prohibited. 2.2.2 Rear Connection terminals ·····································································································12 This specification may be changed without prior notice for improvement of product performance. -
Page 3: Chapter 1. Safety Cautions
Table of contents Chapter 1. Safety Cautions Symbols displayed for each item 5.3 Menu Screen Setup ······················································································································42 5.4 SCREEN SETUP ·····························································································································43 5.4.1 CH1~CH4 / CH1~CH9 (for SVR-940) ······················································································43 Refers to information users need to know in order to prevent serious injury or 5.4.2 AUTO SEQUENCE ····················································································································44 Warning death. -
Page 4: Chapter 2. Summary
Recording The Samsung SVR-940/SVR-450 can record up to 120 frames per second. It also records events on an event list as well as providing a pre-event recording function. . Simultaneous execution of three functions: recording, playback, and networking . -
Page 5: Control Panel On The Front
Model : PLEOMAX R80X5210SJ Network The Samsung SVR-940/SVR-450 supports a wide range of networks such as LAN and ADSL, DHCP. The user can also easily operate and manage the main functions of the unit from a remote location using an 4. - Page 6 Chapter 2. Summary Chapter 2. Summary LED Indication Button Indication Number LED Name Description Number Button Name Description Lights up when power is applied to the system Playback position moves 1 frame forward/back during Pause. Lights up when the system is backing up. Press to start and stop manual recording Lights up when an Alarm is triggered.
-
Page 7: Rear Connection Terminals
Chapter 2. Summary Chapter 2. Summary 2.2.2 Rear Connection terminals 2.2.3 Remote controller Rear panel of SVR-450 • MENU Button to enter Setup Menu • AUTO For Auto Sequence • SPOT Button for Spot ON/OFF (SVR-940.) • PTZ Button for PTZ camera control. •... -
Page 8: Remote Controller
Default HDD 1 ea (Max. 1ea) 1 ea (Max. 2ea) HDD type EIDE 7200rpm Audio Recommended Samsung / Seagate / Maxtor Items SVR-450 SVR-940 4CH Audio Input • Please refer to the recommended HDD model list. Notes Audio 1CH Audio Output... -
Page 9: Specification
Chapter 2. Summary Chapter 2. Summary Search and Playback User Environment Items SVR-450 SVR-940 Items SVR-450 SVR-940 Search by Time: Year, Month, Date, Hour, Minute Operating Temperature 5˚C~ 40˚C Search by Channel: per channel Storage Temperature 10˚C~60˚C Search by Event: Alarm, Motion Detect Humidity 30% ~90%(without dewfall) Search Mode... -
Page 10: Chapter 3. Installation
Chapter 3. Installation Chapter 3. Installation 3.1 How to connect all parts 3.2 Detailed connection The connection layouts for the SVR-450/940 with the monitor, CCTV, and external devices are 3.2.1 Camera described as below. The SVR-450 and 950 can accommodate up to 4 or 9 cameras respectively. Connect the BNC termi- SVR-450 nal of each camera to the CAMERA IN terminal of the unit. -
Page 11: Monitor
Chapter 3. Installation Chapter 3. Installation SVR-940 SVR-940 Audio input • The Video output and the VGA output cannot be used at the same time and the system can send only one video out at the same time. Please refer to Chapter 4.1 Please connect an RCA audio cable to the AUDIO IN connector (such as camera with built-in microphone Checklist before operation for the setting of monitor selection. - Page 12 Chapter 3. Installation Chapter 3. Installation SVR-450 (1-ALARM OUT) SVR-940 SVR-940 (4-ALARM OUT) Description Classification RS-422 RS-485 TX+(+Transmit Data) TX-(- Transmit Data) RX+(+Receive Data) Data+ • The operation of each relay output can be defined by a combination of Motion Detect, and Sensor in the Event Setting on the Main Menu.
-
Page 13: Chapter 4. Operating
Chapter 3. Installation Chapter 3. Installation SVR-940 Description Description Red Signal (75, 0.7Vp-p) N/C(No connection) Green Signal (75, 0.7Vp-p) Ground Blue Signal (75, 0.7Vp-p) Ground N/C(No connection) N/C(No connection) Ground HSYNC (Horizontal Synchronization) Ground VSYNC (Vertical Synchronization) Ground N/C(No connection) Description Description Ground... -
Page 14: Power Connection
Chapter 4. Operating Chapter 4. Operating Video mode Video output 4.3.1 Function of screen display SETTING NTSC When Channel number buttons 1 ~ 4 (SVR-450) / 1 ~ 9 (SVR-940) are pressed, each channel is dis- played in full screen. Factory Default Press the ENTER button, and the four connected channels are displayed in quad split screen * The factory default is set to NTSC video mode and VGA video output. -
Page 15: Recording
Chapter 4. Operating Chapter 4. Operating 4.4 Recording 4.5 Search Press the SEARCH button, and the Search Menu appears as illustrated below. Recorded video can be 4.4.1 Normal recording searched and played back by time, event, or date and the Log File is also displayed. When the REC button is pressed, manual recording is started and the "R"... -
Page 16: Go To Search
Chapter 4. Operating Chapter 4. Operating 4.5.6 Log file search Press the ENTER button on this menu to display the calendar. Select a desired date on the calendar to display the Log files. Press the ESC button to exit this menu. ·... -
Page 17: Playback
Chapter 4. Operating Chapter 4. Operating Figure 3 Figure 3 4.6 Playback 4.5.7.2 Video backup: Only available during Playback mode ① During Playback, Press the PAUSE button to pause the playback and press the COPY button. You will be asked whether to store a Still image or Video (Figure 1). -
Page 18: Pan/Tilt
Chapter 4. Operating 4.8 DVR Backup File Player The DVR provides an exclusive video file format as well as AVI file type.To play and see the DVR (exclusive) type file, you should play back this video file on our exclusive player as follow. SEARCH MENU COPY... -
Page 19: Chapter 5. Configuration
Chapter 4. Operating Chapter 5. Configuration 4. Select the backup file (DVR type) you wish to 5. Click the play button to start playback the DVR 5.1 Menu configuration playback file you selected. Press the Menu button on the front side of the unit or the MENU button on the remote control, and the menu for a variety of settings related to the unit will appear. -
Page 20: Default Setup
Chapter 5. Configuration Chapter 5. Configuration EVENT BEEP, EVENT AUTO SEQ, EVENT TIME, TEXT MONITORING, 5.2 Default Setup EVENT SENSOR-SENSOR TYPE The SVR-450/940 are delivered to customers with the factory default values as described below. To initialize the menu setup to the factory default values, select [YES] for the [DEFAULT] item in [SYSTEM MOTION CHANNEL- MOTION ZONE, MOTION SENSITIVITY SETUP]-[ETC] on the menu. - Page 21 Chapter 5. Configuration Chapter 5. Configuration • EVENT SETUP Main Menu Submenu Default Main Menu Submenu Default SYSTEM ID BAUD RATE 9600 EVENT BEEP RS-232 DATA BIT EVENT AUTO SEQ PARITY BIT NONE EVENT TIME 5 SEC EVENT STOP BIT TEXT MONITORING SENSOR SYSTEM ID...
-
Page 22: Menu Screen Setup
Chapter 5. Configuration Chapter 5. Configuration 5.3 Menu Screen Setup 5.4 SCREEN SETUP This is the set up menu related to the DVR system. Press the MENU button and select the Tab using Select the MENU button on the remote control or the main unit, and the following Menu Screen the Left/Right button. -
Page 23: Auto Sequence
Chapter 5. Configuration Chapter 5. Configuration . BRIGHTNESS : Adjusts the screen brightness by changing the values. · OSD [ON/OFF] : With OSD [ON], Status information is displayed on the live screen. . CONTRAST : Adjusts the screen contrast by changing the values. ·... -
Page 24: Record Setup
Chapter 5. Configuration Chapter 5. Configuration 5.5 RECORD SETUP 5.5.2 DETAIL SETUP This is a set up menu related to the DVR system. Press the MENU button and select the Tab using the Left/Right button. The submenu related to the system then appears as illustrated below. Press the ENTER button and select the submenu using the Left/Right button. -
Page 25: Event Setup
Chapter 5. Configuration Chapter 5. Configuration A Schedule can be set 24 hours a day. SENSOR : Select the channel for sensor setup. · S : Sensor record - SENSOR TYPE : Select the sensor type. (N/O, N/C) · - : No record - N/O : NORMAL OPEN type sensor ·... -
Page 26: Pos Quick Guide
Chapter 5. Configuration Chapter 5. Configuration · SYNC CHANNEL: Select the channel to display TEXT data from a POS device. Kalatel Quick-Easy Mart · DEVICE 3197 Airport Loop Drive - NORMAL : Select NORMAL when connecting a normal input device such as a bar code scanning device. Costa Mesa, Ca. -
Page 27: Network
Chapter 5. Configuration Chapter 5. Configuration 5.7 NETWORK 5.7.1 NETWORK Set the necessary items for network connection to a computer. This is all about DDNS setup in the DVR unit. 2) After finishing the above step, please take the next step with the DDNS server. Please refer to Chapter 5.8 DDNS Registration. -
Page 28: Rs-232
Chapter 5. Configuration Chapter 5. Configuration 5.7.4 RS-232 This menu is for setting a connection with a POS device. · SEND E-MAIL : Select ON for E-mail sending. · MAIL ADDRESS : Press the ENTER button to display the Keyboard screen and select the correct E-mail address. - Page 29 Chapter 5. Configuration Chapter 5. Configuration - Agreement the general terms and conditions 2)The product registration is possible after sign up. - Sign in at iPOLiS website - Product List (If you didn’t register products, there are no list) - SIGN UP page : check ID availability - Product Registration (Check ID availability) Digital Video Recorder User’s Manual...
-
Page 30: Instructions On Using Ddns
Chapter 5. Configuration Chapter 5. Configuration - Check the registration at product list 4) The connection status of selected product can be checked on product list. [VIEW] : See the log-in page of selected product 3) DDNS Configuration at DVR [Edit]/[Delete] : Edit/Delete the selected product, password is needed for checking Press the MENU button, then select [Network] on OSD Menu. -
Page 31: Editing Registered Product
Chapter 5. Configuration Chapter 5. Configuration - under ‘Product Information’ i. Editing product profile Product Information : Checking connection status and other information through a MAC ADDRESS 2) Video playback function - Click the edit button from the product list 5.10 Editing registered product ii. -
Page 32: System Setting
Chapter 5. Configuration Chapter 5. Configuration 5.11 System setting This is a set up menu related to the DVR system. Press the MENU button and select the Tab using the Left/Right button. The submenu related to the system appears as illustrated below. Press the ENTER button and select the submenu using the Left/Right button. -
Page 33: Password
Chapter 5. Configuration Chapter 5. Configuration 1. Authorization functions 5.11.3 Password - Administrators build the system considering the two factors below. i. Select the functions whose use is to be restricted. Set the Admin and Network Passwords and set each limitation according to each password. The DVR supports one ADMIN and three USER accounts. -
Page 34: Clock Setup
· MODEL : Set the camera model. Please select the correct model name because each camera manufac- turer applies different camera control protocols. Available models - Samsung Electronics : MRX-1000, MPT230 - Samsung Techwin : SPD-3300,2300,1000 - PELCO : PELCO(P), PELCO(D), CM6700 - DAYLIGHT SAVING : Select whether to apply Daylight Saving Time. -
Page 35: Etc
Chapter 5. Configuration Chapter 5. Configuration 5.14 ETC 5.14.2 Index Start Fail When the DVR system time is reset or mismatched, the message below is displayed. This message is 5.14.1 Firmware Upgrade displayed when the DVR system time is set to before of the time recording data on the HDD. If the DVR system time is set correctly, the DVR will not show the 'TIME MISMATCH' error message. -
Page 36: Chapter 6. Web-Viewer
Chapter 5. Configuration Chapter 6. Web-Viewer ③ After setting the YEAR/MONTH/DATE/HOUR/MIN/SEC, press the ENTER button. Items Description ④ Please set the time correctly. If the time overlaps the final recording date on the HDD, the overplayed If the system is using a Dynamic IP address, select 'iPolis Server'. data will be deleted. -
Page 37: Search Mode
Chapter 6. Web-Viewer Chapter 6. Web-Viewer 6.3 SEARCH mode Buttons Functions Button to select screen display from 4/ 9/ 16 channels. (4 / 9 channels screen display is available for SVR-450/940.) Button to activate Auto sequence mode. ( = Auto Sequence ) Button for playback pause. -
Page 38: Web-Viewer Buttons
Chapter 6. Web-Viewer Chapter 6. Web-Viewer 2) Search Mode 6.4 Web-Viewer buttons 1) Live Mode Not available 4/9/16 channels Auto Sequence - Auto sequence of the selected Button for Live Mode Button for Search Mode channel. Button for OSD control over video screen. -
Page 39: Chapter 7. Troubleshooting
Chapter 7. Troubleshooting 4CH/9CH Standalone Digital video recorder Specifications The SVR-450/940 is a very sophisticated device, so failure can occur. In case of failure, please follow Spec. SVR-450 SVR-940 the instructions given below. Video Input 4BNC 9BNC • The unit will not turn on even after plugging in the adaptor jack. * Check whether the power cord is properly plugged in. - Page 40 The bellow models of SAMSUNG/Seagate/Maxtor/HITACHI are highly rec- Reconi- Play- ommended for SVR-450/SDVR-940 COMPANY MODEL SIZE BUFFER Record tion back 7200 Reconi- Play- ST31200-25ACE 120 GB COMPANY MODEL SIZE BUFFER Record tion back 7200 7200 ST31600-22ACE 160 GB 80 GB...
- Page 41 MEMO MEMO...
- Page 42 SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145 SAMSUNG OPTO-ELECTRONICS UK, LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS TEL : +44-1932-45-5308 FAX : +44-1932-45-5325 www.samsungtechwin.com www.samsungcctv.com...