Table of Contents
Advertisement
5-14
FUEL SYSTEM
LOW PRESSURE FUEL PUMP
REMOVAL / INSTALLATION
REMOVAL
1. Disconnect inlet hose 1 and outlet hose 2 from low pres-
sure fuel pump.
2. Remove two bolts 3.
3. Remove fuel pump 4.
Note position before removing O-ring 5.
INSTALLATION
Installation is reverse order of removal with special attention to
the following steps.
• Before installing fuel pump, rotate the crankshaft to
bring No.1 (top cylinder) piston to Top Dead Center
on compression stroke.
• Do not re-use O-ring once removed. Always use a
new O-ring.
Low pressure fuel pump bolt :
10 N m (1.0 kg-m, 7.0 lb.-ft.)
- Quick Links:
- Anodes and Bonding Wires
- Power Trim and Tilt
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DF 90 and is the answer not in the manual?
Questions and answers
location of oil sensor on df 90
What year is this manual for. I have a engine from 2016 that i looking for a manual to.
The Suzuki DF90 manual is for the year 2008.
This answer is automatically generated
@Mr. Anderson Thank you for the answer. Is the manual for 2016 here on the site, ore can I find it anywhere else?
добрый день ! меня интересует такой вопрос как происходит питание от генератора к приборной панели ?
да забыл указать двигатель DF 140 2012г