Table of Contents
Advertisement
FUEL VAPOR SEPARATOR / HIGH PRESSURE FUEL PUMP
REMOVAL / INSTALLATION
REMOVAL
The components after the high pressure fuel pump re-
main pressurized at all times.
To protect against fuel spray, relieve fuel line pressure
before disconnecting or removing components.
1. Remove intake manifold assembly.
(See page 6-2)
2. Remove three bolts and fuel vapor separator assembly from
intake manifold.
3. Disconnect fuel outlet hose from fuel vapor separator.
INSTALLATION
Installation is reverse order of removal.
See page 6-4 for installation of intake manifold assembly.
FUEL SYSTEM
Intake manifold
Intake manifold
1. Outlet hose
1. Outlet hose
5-7
1 1
- Quick Links:
- Anodes and Bonding Wires
- Power Trim and Tilt
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DF 90 and is the answer not in the manual?
Questions and answers
location of oil sensor on df 90
What year is this manual for. I have a engine from 2016 that i looking for a manual to.
The Suzuki DF90 manual is for the year 2008.
This answer is automatically generated
@Mr. Anderson Thank you for the answer. Is the manual for 2016 here on the site, ore can I find it anywhere else?
добрый день ! меня интересует такой вопрос как происходит питание от генератора к приборной панели ?
да забыл указать двигатель DF 140 2012г