Panasonic KX-NS1000 User Manual page 383

Required Programming
•
PBX
For making a call:
ARS programming (® 2.8.1 Automatic Route Selection (ARS)) or TIE line service programming
For receiving a call:
TIE line service programming
[TIE Line Routing and Modification Table]
Location Leading
No. No.
01 2
02 3
: :
[Explanation]
Calls to destinations with leading number "2" or "3" are automatically routed through the VoIP ports,
designated as trunk group 2.
•
IP Gateway
IP address assignment for the local PBX and other PBXs.
[Programming Example]
Leading No.
2
3
:
[Explanation]
Calls are routed to the IP address of each V-IPGW/IP-GW card based on the leading number dialled.
Automatic Rerouting of VoIP Calls to Public Trunks
When a VoIP call cannot be completed successfully, the PBX can automatically attempt to make the call using
a public trunk instead. This provides a backup method of making calls in cases when IP network transmission
cannot be completed successfully.
Priority 1
Dial Modification
TRG Removed
No. of
Digits
2
(VoIP 0
port)
2 0
: :
Destination
IP Address
200.45.11.35
199.176.64.1
:
4.3.2 Voice over Internet Protocol (VoIP) Network
TRG Removed
Added
No.
: :
Priority 2
Dial Modification
Added
No. of
No.
Digits
: :
Feature Guide
. .
. .
. .
. .
. .
:
383