Panasonic KX-NS1000 User Manual page 176

2.15.1 Conference Group Call
Conditions
•
Only extensions that are permitted by COS programming can originate conference group calls.
•
Conference Group Call Control features are unavailable if an SLT or SIP extension is used to initiate the
call.
•
After one conference group member answers the call, the conference or announcement is established.
•
If no members answer the call within the preprogrammed time limit, the caller will hear a busy tone.
•
The caller will hear a confirmation tone every time a member answers the call.
•
When the originating caller of a conference group call goes on hook, the call ends and all participating
members will be disconnected.
•
The conference group call will reach a member extension regardless of settings such as Call Forwarding
(except DND).
•
If a member extension is busy and has Call Waiting for trunk calls activated when a conference group call
is made, a call waiting tone will be sent to the extension.
•
The call information of the caller (not members) will be recorded on SMDR.
•
A caller cannot make a conference group call with a call on hold.
•
Call Pickup is not available for a conference group call. (® 2.4.3 Call Pickup)
•
The conference group call will not reach members when:
–
the member extension has set DND for intercom calls.
–
the member extension is a PS in Wireless XDP Parallel Mode. (® 5.2.4.5 Wireless XDP Parallel
Mode)
•
If a conversation has reached the maximum number of participants, the Join After Time Out feature cannot
be used to join the conversation.
•
If 7 members of a Broadcast Mode call already have the ability to speak enabled, PS users cannot use the
push-to-talk feature.
•
If a member uses push-to-talk to enable the ability to speak during a Broadcast Mode call, the member
cannot disable this ability. They can mute their microphone manually, or the originator of the call can use
conference group call control to disable their ability to speak.
•
Since each PS requires one wireless channel, note your PBX's wireless capacity when assigning multiple
PSs to a conference group.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—
Call—Ring Duration
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Operation
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Miscellaneous—
Group Call Operation
11.9 PBX Configuration—[3-9] Group—Conference Group
→ Broadcast Mode
→ PS Operation to Talk
11.9.1 PBX Configuration—[3-9] Group—Conference Group—Member List
Feature Guide References
2.4.4 Hands-free Answerback
6.1 Capacity of System Resources
User Manual References
1.7.3 Making a Conference Group Call
176 Feature Guide
Conference Group
Conference Group Call
Conference