Table of Contents
Advertisement
Operations (Step 5 Setting Using the Web Browser)
5-4 Setting Using the Web Browser (4. PAN/TILT Setting)
PAN/TILT Setting window:
http:// ***** /configpantilt-e.html (" ***** " represents the URL of VN-C625)
This section describes procedures to perform various PAN/TILT settings.
1
PAN/TILT Speed
For performing settings related to the speed of
Pan/Tilt operation.
1(Low), 2 to 7, 8(Fast):
For selecting the speed of Pan/Tilt operation.
The larger the value, the higher will be the
Pan/Tilt speed.
According to ZOOM, speed of operation is
made variable.:
Alters the pan/tilt speed automatically
according to the zoom of the lens.
The speed lowers when the zoom position
is set to the Tele-end, and increases when
set to the Wide-end.
98
1
2
Click
the set values.
Click
saving the set values. These settings will
be cleared upon turning off the power of
VN-C625, and the previous settings will
be restored.
2
Auto Flip
Inverts images on the screen according to the
camera angle. Set this function when shooting
an object that passes beneath the camera.
OFF
: Auto Flip is disabled.
Mode 1 : The image rotates 180˚ horizontally
and stops when the object comes
beneath the camera. In this case, the
camera and pan/tilt operations
function in the same direction.
Mode 2 : The image rotates 180˚ horizontally
when the object comes beneath the
camera, and direction of the camera
and pan/tilt operations function in
opposite direction. Set this function
to enable continuous operation.
Mode 3 : The image rotates 180˚ horizontally
when the object comes beneath the
camera. The camera and pan/tilt
operations, which are in opposite
directions to each other, will be
aligned upon a lapse of at least 10
seconds.
to apply settings and to save
to apply settings without
Advertisement
Table of Contents
