Pan/Tilt Setting - JVC V.NETWORKS VN-C625 Instructions Manual

3-9 Pan/Tilt Setting

The "V.Networks Controller" can be used to perform pan/tilt settings.
1.
Select [Setting] and [Pan/Tilt Setting].
2.
Perform Pan/Tilt settings.
3.
Click .
Pan/Tilt Speed
Sets the speed of movement when Angle Step is
set to "0".
Variable:
Alters the pan/tilt speed automatically according
to the zoom of the lens.
The speed lowers when the zoom position is
set to the Tele-end, and increases when set to
the Wide-end.
Speed 1 to Speed 8:
Sets the Pan/Tilt speed. The larger the value,
the higher will be the pan/tilt speed.
Auto Flip
Inverts images on the screen according to the
camera angle. Set this function when shooting an
object that passes beneath the camera.
Mode 1:
The image rotates 180˚ horizontally and stops
when the object comes beneath the camera.
In this case, the camera and pan/tilt operations
function in the same direction.
Mode 2:
The image rotates 180˚ horizontally when the
object comes beneath the camera, and
direction of the camera and pan/tilt operations
function in opposite direction. Set this function
to enable continuous operation.
Mode 3:
The image rotates 180˚ horizontally when the
object comes beneath the camera. The camera
and pan/tilt operations, which are in opposite
directions to each other, will be aligned upon a
lapse of at least 10 seconds.
OFF:
Auto Flip is disabled.
71