Placing Paper And Originals - Toshiba e-studio306LP Quick Start Manual

Placing Paper and Originals

This section explains how to set paper and originals. Incorrect setting causes image skews or paper jams. Follow the
procedure below.
Placing paper
1
2
Pull out the drawer and place paper face up.
2
2
Set the end guide so that it matches the paper
size.
3
2
Set the side guides so that they match the paper
size.
1
1
1

Placing Paper and Originals

4
Push in the drawer.
Be careful not to catch your fingers when pushing the
drawer back.
This could injure you.
• Be sure that the height of the stacked paper does not
exceed the MAX line indicated on the side guides. If the
paper is curled, turn the curled face down as indicated in
the figure.
• When loading paper erased by e-STUDIO RD30, divide the
paper into approximately 50 sheets, shuffle well and align
before loading into the drawer.
For paper available for the equipment, see the following
page:
& P.63 "Specifications of Equipment" in this manual
1
15