Placing Paper And Originals - Toshiba e-STUDIO5506AC Quick Start Manual

Chapter 1 PREPARATIONS

Placing Paper and Originals

This section explains how to set paper and originals. Incorrect setting causes image skews or paper misfeeds. Follow the
procedure below.
Placing paper
1
Pull out the drawer and release the side
guide's lock.
2
Set the side guide to match the paper
width.
3
Lock the side guides.
18
4
After fanning the paper, place it face up.
5
Set the end guide to match the paper
size and then slowly push in the drawer.
Be careful not to catch your fingers when pushing
the drawer back.
This could cause an injury.
Check that the height of the paper does not exceed
the MAX line on the side guides.
See the following page for supported paper:
& Specifications Guide (PDF) : "Chapter 1:
SPECIFICATIONS OF PAPER"