Part Identification Chart - Weider CrossBow User Manual

M6 Black Nylon Locknut (69)
M10 Nut (47)
M8 Nylon Locknut (65)
M10 Nylon Locknut (76)
M10 x 25mm Button
Head Screw (87)
M8 x 25mm Button
Head Screw (46)
M8 x 19mm Button
Head Screw (86)
M6 x 16mm Screw (82)
M4 x 16mm Screw (62)
M4 x 12mm Flat
Head Screw (85)
M6 x 45mm Screw (58)
M10 x 47mm Button Head Bolt (71)
M10 x 65mm Button Head Screw (70)
M10 x 69mm Bolt (60)
M10 x 66mm Carriage Bolt (83)
M10 x 72mm Bolt (64)
M10 x 102mm Button Head Bolt (24)
M10 x 107mm Bolt (97)
M10 x 108mm Bolt (81)
M10 x 116mm Button Head Bolt (40)
M10 x 132mm Bolt (66)
M10 x 143mm Carriage Bolt (73)

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on the reverse side of this page. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M10 Split Washer (103)
M10 Washer (75)
38mm Round
Inner Cap (38)
19mm Round Inner Cap (78)
45mm Round
Inner Cap (56)
50mm Square
Inner Cap (98)
38mm x 64mm Inner Cap (41)
M8 Split Washer (52)
M8 Washer (59)
19mm Spacer (17) 22mm Spacer (106)
25mm Square Inner Cap (54)
50mm Round
Inner Cap (57)
57mm Round Outer Cap (27)