Administrator User Name And Password; Administrator Setting - Kyocera TASKalfa 1800 Operation Manual

Installing and Setting up the Machine > Administrator User Name and Password

Administrator User Name and Password

If you are setting a function that requires administrator rights, you must enter your login user name and login password.
The factory default login user name and login password are set as shown below.
Admin
*1 Upper case and lower case letters are distinguished (case sensitive).
You can change the default login user name and login password. Refer to
You will be unable to log in if you forget your login user name or login password.
If job accounting is enabled, you need to enter an account ID. Refer to
1
2

Administrator Setting

Change the login user name and login password for the administrator.
1
Login User Name
*1
Enter the login user name.
Login User Name
If this screen is displayed during operations, enter the login user name using the numeric keys
and press the [OK] key.
Character Entry Method (page 10-4)
Enter the login password.
Login Password
Enter the login password using the numeric keys and press the [OK] key.
Character Entry Method (page 10-4)
Display the screen.
1
Press the [Status/System
2
Press the [▲] or [▼] key to select [Admin/Accounting], and press the [OK] key.
Status/Sys. Menu
Admin/Accounting
Login Password
*1
Admin
Administrator Setting on page
Login/Logout on page
2
1
2
1
Menu/Counter] key.
1
2-20
2-20.
8-15.
2