Table of Contents
Advertisement
Operating the ISMA Server System
To play the stream from ISMA Server mode, ISMA-complaint player is required.
2
There are 2 types of streaming: unicast that is available only for one client, and multicast that
is available for multiple clients. Operation of player differs depending on the streaming type.
1Å@ÉpÉ\ÉRÉìÇÃIPÉAÉhÉå
Server side
ENCODE
DECODE
CF
PLAY
STOP
Number display
Perform the following steps on PC.
For unicast
1.
Set the IP address of the PC for connection
with DM-NC40.
See "Setting the IP Address", pages 20 and 22
Memo
Make sure the same IP addresses have not been
set within the same network.
2.
Launch the ISMA-compliant player.
3.
Select "Open URL"
Enter:
"rtsp://*.*.*.*/Iive.mp4"
(*.*.*.* is the IP address of DM-NC40)
4.
To stop, close the player by clicking
top right of the window.
Memo
•
UP to 5 players can be connected simulta-
neously for unicast. (Number of players will be
counted as 2 even if connections from 2 play-
ers are from the same PC.)
-
HOLD
IN 1
IN 2
POWER
HOLD SELECT
P P
in
on the
Network
Network
For multicast
1.
Set the IP address of the PC for connection
with DM-NC40.
See "Setting the IP Address", pages 20 and 22.
2.
Launch the Web browser
In Network Setup of the unit (
Multicast stream start button to "ON".
The multicast stream is transmitted from the DM-
NC40.
Memo
When transmitting multicast streams from multiple
DM-NC40 units, make sure the same multicast IP
addresses or port numbers are not used.
3.
Receive multicast streams with an ISMA-
compliant player
For receiving multicast stream, contact the nearest
JVC-authorized service agent.
Memo
Number display during transmission
Number of unicast clients(0-5)
0: Multicast transmission not in progress
1: Multicast transmission in progress
Player side
page 30), set the
47
Advertisement
Table of Contents
