Preparation Flow - JVC DM-NC40 Instructions Manual

Preparation Flow

Perform settings using the steps shown below.
Step 1 Connection/Installation
• Connect cables to the back of the unit.
• For recording, insert a CF card
• When completed, turn on the power.
Step 2 PC Network Settings
• Network settings for the unit have been performed at the time of shipment.
First, perform network settings for the connecting PC.
Step 3 Launching the Web Browser
• Launch the Web browser and input the IP address of the unit (Factory setting
of IP address, 10.0.0.1, is enabled if there is no DHCP server in the LAN.)
• Login as the administrator. Input the user name and password for administrator.
Step 4 Initial Settings
• Change IP address of the unit according to the network environment.
You need reconnect Web browser with new IP address after changed.
• Set the date and time to the unit.
Step 5 Mode Setting
• Select mode of the unit according to the application.
( See "1-1 Connection Examples", page 13)
Step 6 Detailed setup
• Perform detailed setup for each application.
About the ISMA Server Mode
• ISMA-compliant player is available with the ISMA Server mode.
12
<Settings hereafter will be performed using the Web browser.>
Page 13 ~
Page 20 ~
Page 24 ~
Page 27 ~
Page 29 ~
Page 30 ~
For details, please consult the person in
charge of professional equipment at your
nearest JVC-authorized service agent.