Table of Contents
Advertisement
4.
Set the IP address
5.
Click
in the "Local Area Connection Properties" dialog box" screen
1 Select "Use the following IP address".
2 Set "IP address". (For use at default setting without
DHCP server, enter 10.0.0.100)
Memo
• Always take a memo of the original IP address
before making changes.
• Do not use the same IP addresses within a LAN.
3 Enter appropriate values for "Subnet mask". If
unknown, ask to your network administrator.
(For compatibility with default settings use
255.0.0.0)
4 If there is a "Default gateway", enter the IP
address. (For example, 10.0.0.254)
5 Click
.
1 Click
.
21
Advertisement
Table of Contents
