Table of Contents
Advertisement
Disassembly and Reassembly
3-3-23 Plate Ground Deck, Cylinder Ass'y
Removal
1) Remove the 3 Screws Œ.
2) Lift the Plate Ground Deck ´.
3) Lift the Cylinder Ass'y ˇ.
Assembly :
1) Match the 3 holes in the bottom of Cylinder
ass'y ˇ to the 3 holes of Main Base as attend-
ing not to drop or knock the Cylinder ass'y ˇ.
2) Tighten the 1 Screw Œ.
3) Match the Plate Ground Deck ´ to the Hole of
Base Main.
4) Tighten the other 2 Screws Œ.
Note :
1) Take care not to touch the Cylinder Ass'y ˇ
and the tape guide post at reinstalling.
2) When reinstalling, Don't push down too much
on Screw Driver.
Fig. 3-29 Plate Ground Deck, Cylinder Ass'y Removal
3-18
Π3 SCREWS
´ PLATE GROUND DECK
ˇ CYLINDER ASS'Y
3-3-24 Belt Pulley Removal
1) Remove the Belt Pulley Œ.
Note : Take extreme care not to get grease on Belt
Pulley Πat assembling or reassembling.
ΠBELT PULLEY
Fig. 3-30 Belt Pulley Removal
3-3-25 Level Head Cleaner Ass'y Removal
(Optional)
1) Release the Hook Œ.
2) Lift the Lever Head Cleaner Ass'y ´.
Fig. 3-31 Level Head Cleaner Ass'y Removal
´ LEVER HEAD CLEANER ASS'Y
ΠHOOK
SLEEVE-HEAD CLEANER
Samsung Electronics
Advertisement
Table of Contents
