Samsung CFTD2083TX/SMS Service Manual page 20

Disassembly and Reassembly
3-3-7 Bracket Gear, Gear Joint 2, 1 Removal
1) Remove the SCREW Œ.
2) Remove the Bracket Gear ´.
3) Remove the Gear Joint 2 ˇ.
4) Remove the Gear Joint 1 ¨.
Assembly :
1) Be sure to align dot mark of Gear Joint 1 Œ
with dot mark of Gear Joint 2 ´ as shown Fig
3-12.
(Refer to Timing point1)
2) Confirm the Timing Point 2 of the Gear Joint 2
´ and Slider Cam ˇ.
¨ GEAR JOINT 1
ˇ GEAR JOINT 2
Fig. 3-11 Bracket Gear, Gear Joint 1,2 Removal
ΠGEAR JOINT1
´ GEAR JOINT2
TIMING POINT 2
TIMING POINT 1
Fig. 3-12 Gear Joint 1,2 Assembly
3-10
ΠSCREW
´ BRAKET GEAR
ˇ SLIDER CAM
3-3-8 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass'y Removal
1) Remove the Belt Pulley. (Refer to Fig. 3-30)
2) Remove the Gear Loading Drive Πafter releas-
ing Hook [A] in the direction arrow as shown
in detail drawing.
3) Remove the Slider Cam ´.
4) Remove the Lever Load ˇ, Link Load ˆ &
Lever Load ¨, Link Load Ø.
HOOK(A)
´ SLIDE CAM
Fig. 3-13 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass'y Removal
ΠGEAR LOADING DRIVE
¨ LEVER LOAD T
Ø LINK LOAD T
ˇ LEVER LOAD S
ˆ LINK LOAD S
Samsung Electronics