Samsung CFTD2083TX/SMS Service Manual page 18

Disassembly and Reassembly
3-3-3 Slider FL Drive, Gear FL Cam Removal
1) Pull the Slider FL Drive Πto the front direc -
tion.
2) Remove the Slider FL Drive Πin the direction
of arrow. (Refer to Fig. 3-6)
3) Remove the Gear FL cam ´.
Note : When reinstalling be sure to reassemble
Slider FL drive Πafter you insert the Boss of
Lever FL ARM-R in Groove of Slider Fl drive Œ.
Assembly : Align the Gear FL Cam Πwith the
Gear worm wheel Post as shown drawing.
(Refer to Timing point)
Fig. 3-6 Slider FL Drive Removal
ΠGEAR FL CAM
Fig. 3-7 Gear FL Cam, Gear Worm
3-8
´ GEAR FL CAM
ΠSLIDER FL DRIVE
GEAR WORM WHEEL
POST
TIMING POINT
3-3-4 Lever FL Arm Ass'y Removal
1) Push the hole "A" in the direction of arrow "B"
use the pin.(about Dia. 2.5)
2) Pull out the Lever FL Arm Ass'y Πfrom the
Boss of Main Base.
3) Remove the Lever FL Arm Ass'y Πin the
direction of arrow "C".
HOLE "A"
PIN
"B"
"C"
ΠLEVER FL ARM ASS`Y
Fig. 3-8 Lever FL Arm Ass'y Removal
Samsung Electronics