Changing Tail Light Bulbs (On Rear Lid) - Seat Leon Owner's Manual

Remove the bulb holder
When changing a bulb, you must first remove the bulb hold-
er.
– Remove the bulb holder
tabs.
– Raise the bulb holder.
– Change the defective bulb.
– To refit follow the steps in reverse order, taking special care
when fitting the bulb holder. And especially that all retaining
tabs are properly in place.
– Place the light back into place and tighten with a screwdriver.
1)
The above table corresponds to a right-hand traffic vehicle. The position of lights may vary
according to the country.
Safety First
Fig. 145 Retaining tabs
on reverse side of tail
light
⇒ F ig. 145
unlocking the retaining
A
Operating instructions
Note
In the case of LED lights, change only the turn signal bulb.

Changing tail light bulbs (on rear lid)

Overview of tail lights
1)
Rear lid lights
Left side
Side lights
Fog lights
Right side
Side lights
Reverse light
Practical Tips
Fuses and bulbs

2x W5W LL
H21 W
2x W5W LL
P21W LL

Technical specifications
259