Table of Contents
Advertisement
Mode Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
HDD
ENTER
AUDIO
Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 71 through 73), then follow the procedure below.
DVD VIDEO SET UP
HDD/DVD/DV SET UP
FUNCTION SET UP
INITIAL SET UP
●
The procedure below shows how to set the desired option of the
AAUDIO RECB mode as an example.
1
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press selection keys to select AFUNCTION SET UPB, then
press G.
4
Press selection keys to select
AREC/PLAY SET UPB, then
press G.
5
Press selection keys to select
AAUDIO RECB, then press
ENTER.
6
Press selection keys to select
the desired option, then press
ENTER.
7
Press SET UP to complete the setting.
CABLE/SAT
TV
DVD
DVD
Selection Keys
FGDE
SET UP
LANGUAGE SET (A pg. 22)
AUDIO OUTPUT (See right column)
PARENTAL LOCK (A pg. 33)
DISC PLAY SET UP (A pg. 72)
HDD SET UP (A pg. 72)
DVD SET UP (A pg. 72)
DISC SET UP (A pg. 78, 79)
DV SET UP (A pg. 72)
REC/PLAY SET UP (A pg. 72)
DISPLAY SET (A pg. 73)
VIDEO IN/OUT (A pg. 23, 64)
TUNER SET (A pg. 74)
CLOCK SET (A pg. 77)
DVD VIDEO SET UP
HDD/DVD/DV SET UP
FUNCTION SET UP
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
XP MODE REC AUDIO
AUDIO REC
DIRECT REC
JUMP TIME
ENTER
SET UP
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
* The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
DIGITAL AUDIO OUT
8
PCM
/ PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.
DOLBY DIGITAL/PCM
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
STREAM/PCM
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
PCM ONLY
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
NOTES:
●
This setting also functions when HDD is active.
●
If you watch or play back a title which contains multiple audio
languages, select APCM ONLYB in advance and choose main or
sub audio with AUDIO.
ANALOG AUDIO OUT
8
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO
:
Select this when listening to conventional two-channel stereo
audio with the unit's [AUDIO OUT] connectors connected to a
stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
DOLBY SURROUND
Select this when listening to multichannel surround audio with
the unit's [AUDIO OUT] connectors connected to an amplifier/
receiver with a built-in surround decoder or a surround decoder.
D. RANGE CONTROL
8
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL
Normally select this setting to activate this function.
WIDE RANGE
Select this to deactivate this function when you enjoy wide
dynamic range programme.
TV MODE
Select this when you hear the sound through the TV's
speaker(s).
NOTES:
●
This function has no effect on programmes other than those
recorded in Dolby Digital format.
●
This function does not work when Simulated Surround Effect is
activated. (A pg. 31)
●
The effect of ANORMALB and AWIDE RANGEB may not be
different depending on discs.
OUTPUT LEVEL
8
INITIAL SET UP
You can lower the output level of analogue audio to accommodate
the unit to the connected A/V equipment.
DOLBY DIGITAL
NICAM
STANDARD
OFF
15 MIN
Normally select this setting.
LOW
:
The output level of analogue audio is lowered.
SUBSIDIARY SETTINGS
DOLBY DIGITAL/PCM /
^
:
:
:
STEREO
^
:
NORMAL
^
:
:
:
STANDARD
^
/ LOW
:
71
EN
STREAM/
/ DOLBY SURROUND
WIDE RANGE / TV MODE
/
Advertisement
Table of Contents
