Table of Contents
Advertisement
EDITING
64
EN
Output/Input Set
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
L-1 Output And L-1 Input Setting
The [L-1 IN/OUT] connector accepts and delivers either a
composite signal (regular video signal) or a Y/C signal (a signal in
which the luminance and chrominance signals are separated). Set
AL-1 OUTPUTB and AL-1 INPUTB to the appropriate mode
depending on the type of appliance connected to the unit's [L-1 IN/
OUT] connector.
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AFUNCTION SET UPB, then
press G.
3
Press selection keys to select
AVIDEO IN/OUTB, then press
G.
4
Press selection keys to select
AL-1 OUTPUTB or AL-1
INPUTB, then press ENTER.
5
Press selection keys to select
the appropriate setting, then
press ENTER.
6
Press SET UP to complete the
setting.
* The boldface settings below indicate the settings at your purchase.
L-1 OUTPUT
SCART VIDEO
^
8
RGB / COMPONENT
SCART VIDEO
:
If a connected appliance's input is compatible only with regular
video signals, set to ASCART VIDEOB
SCART S-VIDEO:
If a connected appliance's input is compatible with Y/C signals,
set to ASCART S-VIDEOB. You can obtain high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
CABLE/SAT
TV
DVD
Selection Keys
FGDE
SET UP
DVD VIDEO SET UP
HDD/DVD/DV SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
MONITOR TYPE
4:3LB
F-1 INPUT
VIDEO
L-1 OUTPUT
SCART VIDEO
L-1 INPUT
VIDEO
L-2 SELECT
VIDEO
SELECT WITH @ THEN PRESS [ENTER]
SET UP
ENTER
PRESS [SET UP] TO EXIT
EXIT
SELECT
DVD VIDEO SET UP
HDD/DVD/DV SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
MONITOR TYPE
4:3LB
F-1 INPUT
VIDEO
L-1 OUTPUT
SCART VIDEO
SCART VIDEO
SCART S-VIDEO
VIDEO
L-1 INPUT
SCART RGB
COMPONENT
VIDEO
L-2 SELECT
ENTER
SELECT WITH @ THEN PRESS [ENTER]
SET UP
PRESS [SET UP] TO EXIT
EXIT
SELECT
/ SCART S-VIDEO / SCART
.
SCART RGB:
If a connected appliance's input is compatible with RGB signals,
set to ASCART RGBB. You can obtain a high-quality RGB
picture.
COMPONENT:
If a connected appliance's input is compatible with Y/P
signals, set to ACOMPONENTB. You can obtain a high-quality
Y/P
/P
picture. Switch the TV to the input that you can watch
B
R
component video pictures.
L-1 INPUT
VIDEO
^
/
8
VIDEO
:
If a connected appliance's output is compatible only with regular
video signals, set to AVIDEOB.
S-VIDEO
:
If a connected appliance's output is compatible with Y/C
signals, set to AS-VIDEOB. You can obtain a high-quality
picture. (For connection, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.)
NOTES:
●
If AL-1 OUTPUTB is set to ASCART S-VIDEOB or ASCART RGBB,
it is not possible to set AL-1 INPUTB to AS-VIDEOB.
●
If AL-2 SELECTB is set to ASAT S-VIDEOB or ADECODERB, it is
not possible to set AL-1 INPUTB to AS-VIDEOB.
●
If AL-2 SELECTB is set to ADECODERB, it is only possible to set
AL-1 OUTPUTB to ASCART VIDEOB
●
Component video signals are not output from the [L-1 IN/OUT]
connector.
●
When Progressive scan mode is engaged, it is not possible to
select the setting of AL-1 OUTPUTB. (A pg. 64)
L-2 Select Setting
Set AL-2 SELECTB to the appropriate mode depending on the type
of appliance connected to the unit's [L-2 IN/DECODER] connector.
1
Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB on
the left column.
2
Press selection keys to select AL-2 SELECTB, then press
ENTER.
3
Press selection keys to select
the appropriate setting, then
press ENTER.
4
Press SET UP to complete the
setting.
* The boldface settings below indicate the settings at your purchase.
L-2 SELECT
VIDEO
^
8
DECODER
Select AVIDEOB or AS-VIDEOB to use this unit as the recording
deck with the player connected to the [L-2 IN/DECODER]
connector, or to use the satellite receiver connected to the [L-2 IN/
DECODER] connector.
VIDEO
:
If a connected appliance's output is compatible only with regular
video signals, set to AVIDEOB.
S-VIDEO
:
If a connected appliance's output is compatible with Y/C
signals, set to AS-VIDEOB. You can obtain high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
Select ASAT VIDEOB or ASAT S-VIDEOB to view a satellite
programme with the TV set while the unit is turned off. (A pg. 70)
SAT VIDEO
:
If a connected satellite receiver's output is compatible only with
regular video signals, set to ASAT VIDEOB.
S-VIDEO
.
DVD VIDEO SET UP
HDD/DVD/DV SET UP
FUNCTION SET UP
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
MONITOR TYPE
F-1 INPUT
L-1 OUTPUT
L-1 INPUT
L-2 SELECT
SET UP
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
S-VIDEO
SAT VIDEO
SAT S-VIDEO
/
/
/
/P
B
R
INITIAL SET UP
4:3LB
VIDEO
VIDEO
SCART VIDEO
VIDEO
S-VIDEO
VIDEO
SAT VIDEO
DECODER
/
Advertisement
Table of Contents
