Page 1
INDUSTRIAL FAN FORCED HEATER OWNER’S MANUAL MODEL: DR-988 IMPORTANT INSTRUCTIONS READ & SAVE WARNING NOT FOR HOUSEHOLD USE THIS IS A FLOOR HEATER ONLY...
IMPORTANT INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS HEATER NOTE: There may be a trace of smoke or odor when unit is first operated. Do not be alarmed. This indicates that a drop of oil fell on the heating coil during the manufacturing process. It will quickly evaporate and should not re-occur.
17. Be sure that the plug is fully inserted into appropriate receptacle. Please remember that receptacles also deteriorate due to aging and continuous use: check periodically for signs of overheating or deformations evidenced by the plug. Should this occur, do not use the receptacle if deteriorated. CALL your electrician. 18.
PARTS OF THE HEATER 1. Carry handle 2. Housing 3. Safety grille 4. Heating element 5. Thermostat control 6. Plug (NEMA #6-30P) OPERATING INSTRUCTIONS !! IMPORTANT THIS HEATER IS FOR USE ON THE FLOOR ONLY. Prior to operating the heater, ensure the electrical receptacle is of the configuration and capacity appropriate for the heater.
“click”. This sets the heater to cycle ON/OFF to maintain the desired heating temperature for energy efficiency. 4. To completely shut unit OFF, turn the thermostat dial to the OFF position and unplug the heater. SPECIFICATIONS DR-988 Model Number Power Supply 240 volts AC, 60Hz...
TROUBLESHOOTING If your heater fails to operate, please follow these procedures before contacting customer services: Problem Probable Cause Solution Turn the heater OFF; unplug it and ALLOW IT Overheat protection has temporarily TO COOL. Inspect and remove any objects on deactivated the heater.
Need help?
Do you have a question about the DR-988 and is the answer not in the manual?
Questions and answers