Head Replacement - Roland VersaCamm SP-540V Service Notes

3-1 HEAD REPLACEMENT

1 Turn on the SUB POWER SW and perform the [PUMP
UP] from the [INK CONTROL] menu.
W h e n i t f i n i s h e s , t h e S U B P O W E R w i l l b e
automatically turned off.
2 Turn on the SUB POWER SW while pressing the Left,
Right and Down keys to enter the SERVICE MODE.
3 Input the HEAD RANK of the head which is going to be
installed.
Make sure to input the HEAD RANK before
replacing the head, because the sticker which
the head rank is written on will be hidden
once the head is installed.
4 In [HEAD RANK] menu, select the Head No. of the head
that you are going to replace and input the HEAD RANK
written on the new head.
Input the HEAD RANK by selecting the digit with the
Left and Right keys, and changing the parameters with
the Up and Down keys.
Press the [ENTER] key to save the settings.
** The left Head is [HEAD 1].
MENU
INK CONTROL
[ ], [
MENU
SERVICE MENU
SERVICE MENU
HEAD RANK
HEAD RANK
HEAD 1
HEAD RANK 1
5CY2F2F
3-3
INK CONTROL
EMPTY MODE
INK CONTROL
PUMP UP
INK CONTROL
HEAD WASH
], [ ] + POWER ON
[MENU] key
HEAD RANK
[ ]
[ ]
(1/5)
[ENTER]