Musical Fidelity Supercharger 550K Instructions For Use Manual

SUPERCHARGER
MONOBLOCK BRIDGED POWER AMPLIFIER
INSTRUCTIONS FOR USE
550K
Thank you for purchasing the Musical
Fidelity Supercharger 550K monoblock.
The Supercharger 550K uses the latest in
low distortion circuitry in a bridged
configuration which delivers 550 watts rms.
The Supercharger 550K is designed to
increase the dynamic range of an existing
lower powered amplifier (from 50 watts to
200 watts) to 550 watts. The dynamic range
will increase by up to 10dB. This does not
necessarily mean that the average listening
level will be much louder; it's just that
musical transients will now be delivered
without distortion or limiting. Overall the
listening experience is greatly improved
because of dramatically lower distortion
and increased dynamic range.
The 550K accepts both speaker level and
line level inputs. When driven from an
existing amplifier the sound quality is
greatly improved because the 550K presents
an easy load for the existing amplifier to
drive and at the same time gives up to 10dB
increase in dynamic range.
Alternatively, the Supercharger 550K can
be used as a conventional power amplifier
driven by a high quality preamp.
The Supercharger 550K is a perfect answer
to improve dynamic range in a single
beautifully
properly and carefully, it should give many
years of outstanding musical reproduction.
Dust regularly with a soft duster or soft
brush, but be careful when using cleaning
or polishing agents - they may harm the
surface finish.
If there are further questions about any
Musical Fidelity component, please consult
the dealer from whom it was purchased,
who is there to help and give advice.
engineered package. Used