Musical Fidelity M8 500S Instructions For Use Manual

Instructions for use
Thank you for purchasing the Musical Fidelity M8 500S fully balanced dual mono power amplifier.
The M8 500S is designed to be partnered with present and future M8 series products. It is, in fact, based on the
Titan design. It features a pair of twin high-current power amplifier sections connected in bridged mono
configuration for the absolute best in dynamics and drive capabilities. Two generous over specified power
supplies also ensure unsurpassed supply noise filtering, transient handling and massive power reserve possible
in a single box power amplifier.
Phase splitting between the two internal amplifiers is achieved using a high performance fully balanced
converter circuit with wide flat frequency response uniform in-band characteristics and immeasurably low
distortion and noise.
Fully balanced as well as single ended inputs are catered for along with loop outputs for both types, to enable
bi-amping etc. Trigger input/output allows the unit to be controlled/controller for switch on/off function.
This combination yields one of the best high-fidelity power amplifiers available at any price.
Used properly and carefully, it should give many years of outstanding musical reproduction.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may
harm the surface finish.
If there are any questions about the product or related, please consult the dealer who is there to help and
advice.