Accessories - Miele H 310 Operating Instructions Manual

Cleaning and care
Stainless steel fronted appli-
ances
The appliance front and controls are
susceptible to scratches and abrasion.
Please observe the cleaning instruc-
tions for
– stainless steel surfaces,
– stainless steel coloured controls.
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive clean-
ing agent designed specifically for use
on stainless steel or the Miele E-Cloth.
Avoid:
– cleaning agents containing soda, ac-
ids or chlorides,
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
can also be used.
Apply sparingly with even pressure us-
ing a soft cloth following the direction of
the grain.
Stainless steel coloured controls
The controls may suffer discolour-
ation or damage if soiling is left on
them for too long.
Remove any soiling straight away.
46
Avoid:
– cleaning agents containing soda, ac-
ids or chlorides,
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents,
– stainless steel cleaners,
– oven sprays.

Accessories

Always remove all accessories, trays
and racks which are not being used
when using the oven to get the best
results and to keep cleaning of the
trays to a minimum.
Baking tray, grill pan, rack and side
supports
The surfaces of these have been
treated with PerfectClean enamelling.
See "PerfectClean" for cleaning instruc-
tions.
Roasting filter
Clean in a solution of hot water and a
little washing up liquid or in the dish-
washer.
Note: some dishwasher detergents may
cause the surface of the metal filter to
discolour. This discolouration will not af-
fect the functioning of the filter in any
way.