Table of Contents
Advertisement
Operations (Step 4 Operation Using the V.Networks Controller)
4-1 Features that Allow Operation Using the V.Networks Controller
The "V.Networks Controller" can be used to select a camera as well as record/play
back camera images.
(The controller screen is identical to other V.Networks versions, and there are
functions that cannot be operated from VN-C205)
1
2 3 4 5
1
CAMERA
Displays the name of the connected camera.
You can also select the connected camera
using
(pull-down menu).
2
PLAY
For selecting and playing back video files
6
saved in
. Use also this button to make a
selection when playing back files recorded
during an alarm.
3
STOP
Stops recording.
4
REC
Starts recording when this is selected.
Recorded files are saved under the name as
1
shown in
. During recording, a [Recording]
1
and [REC] indicator will appear in
and on
the displayed image respectively.
Reduced Screen
1
CAMERA
Compression Mode
66
6
5
Snap Shot
For registering and saving only 1 frame of the
displayed image.
6
Size
For reducing the display size of the [V.Networks
Controller] screen. (See diagram below)
Enlarge Display Screen
4-2 Record/Stop
The "V.Networks Controller" can be used to save camera images to a file.
1.
Click the [REC] button.
Connected Camera
(Saved in a folder under this
name)
Recording Format
[REC] Indicator
(Motion Image Window)
2.
Click the [Stop] button.
Stops recording and the [Recording] and [REC] indicators will disappear.
(Click the [Snap Shot] button to record only 1 frame of the displayed image.
☞
(
Page 71)
Notes
● Avoid recording continuously for an extended period of time. Attempt to play back files recorded
over an extended time may cause playback failure on some PCs due to insufficient memory.
● Do not change the name of the record file. Doing so may cause playback to fail.
2. 1.
[REC] Indicator
67
Advertisement
Table of Contents
