Motorola AP-7131 Series Installation Manual page 38
Hide thumbs
Also See for AP-7131 Series:
- Product reference manual (706 pages) ,
- Installation manual (58 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
32
AP-7131 Series Access Point: Installation Guide
to use the access point as a DHCP server over the LAN connection. Select the
client
NOTE
c. Enter the network-assigned
supported as a valid IP address for the access point. The user is required to enter a
numerical IP address.
d. The
Subnet Mask
the network domain, the next set specifies the subset of hosts within a larger network.
These values help divide a network into subnetworks and simplify routing and data
transmission.
e. If using the static or DHCP Server option, enter a
numerical IP address of a router the access point uses on the Ethernet as its default
gateway
f. If using a static or DHCP Server, enter the
g. If using DHCP Server, use the
range of IP address reserved for mapping clients to IP addresses. If a manually (static)
mapped IP address is within the IP address range specified, that IP address could still be
assigned to another client. To avoid this, ensure all statically mapped IP addresses are
outside of the IP address range assigned to the DHCP server.
NOTE
7. Select the
its ESSID security scheme for basic operation.
NOTE
option to enable a diskless system to discover its own IP address.
Motorola recommends that the WAN and LAN ports should not be
configured as DHCP clients at the same time.
defines the size of the subnet. The first two sets of numbers specify
For additional access point port configuration options, as well as radio,
WLAN and Quality of Service (QoS) options, refer to the
AP-7131 Series Product Reference Guide available at
http://support.symbol.com/support/product/manuals.do.
WLAN #1
tab (WLANs 1 - 4 are available within the Quick Setup screen) to define
A maximum of 16 WLANs are configurable within the access point
Wireless Configuration screen. The limitation of 16 WLANs exists
regardless of the number of radios supported.
IP Address
of the access point. DNS names are not
Default Gateway
Primary DNS Server
Address Assignment Range
Bootp
to define the
numerical IP address.
parameter to specify a
Hide quick links:
Advertisement
Table of Contents
