Table of Contents
Advertisement
Cleaning and care
Stainless steel surfaces
Pan support, control knob
26
Clean stainless steel surfaces using an Original Miele all
purpose microfibre cloth or with a solution of warm water and
a little washing-up liquid applied with a soft sponge. In the
case of stubborn dried-on soiling, soak first.
Finally, dry with a soft cloth.
The Original Miele ceramic and stainless steel cooktop
cleaner can be used to clean the frame when required (see
"Optional accessories"). Apply with an even pressure
following the direction of the "grain".
The Original Miele care product for stainless steel can be
used after cleaning to help keep your appliance looking good
and to hinder resoiling (see "Optional accessories").
Apply sparingly with a soft cloth following the instructions on
the packaging.
Printed surfaces (Flame symbols)
The printing can be damaged if soiling (e.g. food or fluids
that contained salt, olive oil) is not removed immediately.
Remove any soiling immediately.
Do not use any stainless steel cleaner on printed surfaces.
This would rub off the print.
Do not clean the pan support in a dishwasher.
Remove the pan support. Clean the pan support and the
control knob with a solution of warm water and a little
washing-up liquid applied with a soft sponge. Stubborn
soiling should be soaked first.
After cleaning, dry all surfaces with a clean cloth.
Hide quick links:
Advertisement
Table of Contents
