Stainless Steel Surfaces - Miele KM 2312 Operating And Installation Instructions

 The entire cooktop should be cleaned
after each use.
 Stubborn soiling should be soaked
first.
 Dry the cooktop after using water to
clean it. This helps prevent limescale
deposits.

Stainless steel surfaces


Risk of damage by pointed
objects.
The seal between the cooktop and
the worktop could be damaged.
Do not use pointed objects for
cleaning.

Damage caused by soiling.
Soiling, particularly salty food or
liquid and olive oil, can cause
damage if left on the printed surfaces
for a long time.
Remove such soiling immediately.

Damage caused by incorrect
cleaning.
Stainless steel cleaning agents rub
off the printed symbols.
Do not use stainless steel cleaning
agents on printed symbols.
 Clean stainless steel surfaces using a
solution of warm water and a little
dishwashing liquid applied with a soft
sponge. Stubborn soiling should be
soaked first. If necessary, the rough
side of a non-scouring sponge can
be used.
 Finally, dry with a clean soft cloth.
Cleaning and care
29