Stainless Steel Surfaces - Miele KM 362 Operating Instructions Manual

Cleaning and care
 The entire cooktop should be cleaned
after each use.
 Stubborn soiling should be soaked
first.
 Dry the cooktop after using water to
clean it. This helps prevent limescale
deposits.
28

Stainless steel surfaces


Risk of damage by pointed
objects.
The seal between the cooktop and
the worktop could suffer damage.
Do not use pointed objects for
cleaning.

Damage caused by soiling.
Soiling, particularly salty food or
liquid and olive oil, can cause
damage if left on the printed surfaces
for a long time.
Remove any soiling which comes
into contact with the printed flame
symbols straight away.

Damage caused by incorrect
cleaning.
Stainless steel cleaning agents rub
off the printed symbols.
Do not use stainless steel cleaning
agents on printed symbols.
 Clean stainless steel surfaces using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. Stubborn soiling should be
soaked first. If necessary, the rough
side of a non-scouring sponge can
be used.
 Finally, dry with a clean soft cloth.
Useful tip: The Miele care product for
stainless steel can be used after
cleaning to help keep your appliance
looking good (see "Optional
accessories"). Apply sparingly with a
soft cloth following the instructions on
the packaging.