Operation - Miele HM 5316 User Manual

Rotary ironer
Hide thumbs Also See for HM 5316:
Table of Contents

Advertisement

^ Switch on the on-site mains switch.
^ Switch the machine on by pressing the
"On" I button.
^ Press the O button.
The heater plate engages when it reaches a
temperature of approx. 60°C.
^ Select the temperature according to the
type of fabric.
Material
Symbol
Nylon /
artificial silk
Silk / wool
Cottons /
linen
^ Use the speed selector to select the speed
of the roller, depending on the degree of
dampness and the type of laundry to be
ironed.
^ Check that the finger guard is functioning
properly.
,
The finger guard is a safety feature
which must be checked daily for proper
functioning before the machine is used.
When the "Heating" light goes out in the
display, the ironer is ready for use.
^ Feed items across the feed-in table into
the ironer.
^ Smooth items from the middle outwards
towards the edges.
^ Do not restrict ironing of smaller articles to
any one part of the roller. Make use of the
whole roller width.
^ If items need to be pressed, press the foot
control down to the 1st foot control
position.
M.-Nr. 06 017 102
Temperature
levels
ß
Low
temperature
ßß
Medium
temperature
ßßß
High
temperature
The roller will stop. To stop pressing release
the foot control.
^ To feed thicker items into the ironer, press
the foot control down to the 2nd foot
control position.
The heater plate is disengaged.
To protect the motor and the roller cover:
^ In pauses between ironing, disengage the
heater plate and reduce the temperature.
The ironed laundry can be very hot when
it comes off the ironer. Wear gloves to
protect your hands.
If you want to switch back to ironing at a
lower temperature, reduce the temperature
setting and then wait until the "Temperature"
indicator light comes on again.
After ironing:
Switch off the heater and let the roller run for
approx. 5 minutes to let the roller covering
dry out.
^ Press the P button to disengage the roller.
^ Switch off the ironer by pressing the 0
button.
^ Switch off the mains supply at the on-site
mains switch.
,
Allow the ironed laundry to cool down
before packing or stacking it. Hot laundry
could self-ignite and cause a fire.

Operation

11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents