Setting/Canceling Security - Samsung SHT-8610 User Manual

Setting/Canceling Security

To set Security
1
Touch [ ]. Then the security
setting screen appears.
4
The [Security] function is now active.
"Stay mode is
activated."
"
To cancel Security
"
.
1
Touch [ ]. Then the security
setting screen appears.
4
The [Security] function is now
deactivated.
"Deactivated."
30
2
Touch [ ] to set whether or not to
operate the Security mode.
The setting is also possible through the Web browser on your PC. But the sensors
●
cannot be set by your PC individually. (You can only activate/deactivate all sensors.)
Note
(Optional function) Consult with the control office staff for more information.
2
Touch [ ] to set whether or not to
operate the Security mode.
※ This function is used to make the security function activated
even though you do not go out of the house. This function
is active only when the door is closed. (This setting is
available only when the detector operates normally.)
3
Enter the disengagement
password and touch [OK].
※ If the disengagement
password has not been set,
the password touch key pad does not appear.
(see page 70)
3
Enter the disengagement
password and touch [OK].
※ If the disengagement
password has not been set,
the password touch key pad does not appear.
(see page 70)