Page 1
For Customer Use: Enter below the Model No. and Serial No. which are located at the top of the unit. Retain this information for future reference. Model No. MC-D207U Serial No. This instruction manual has been manufactured from 100% recycled paper. LST0038-001B...
Page 2
Thank you for purchasing the JVC MC-D207U DVD-ROM DRIVE. Before you start operating this unit, please read the instructions carefully in order to obtain the best possible performance. 1. DANGER: Invisivle laser radiation will occur when the unit is open with a failed or defeated interlock.
● This unit is a DVD-ROM drive with a 7x speed capability. It especially designed for the JVC CD-ROM Library or CD/DVD Library. It is not compatible with the MC-7000 series “DVD-RAM Library”. ● The MC-D207U cannot be operated separately.
Page 4
Starting installation from the lowest No.1 slot will simplify future installation work. 4. How to Install the DVD-ROM Drive 1. Insert the drive from the rear of the JVC CD-ROM or CD/DVD Library. Pay attention not to damage the sensor slit.
Page 5
5. How To Connect Cables To The DVD-ROM Drive 1. Connect the power supply cable, control cable and SCSI cable to the connectors at the rear of the DVD-ROM Drive. Connect to the drive the power supply cable and control cable which extend from the side of the DVD-ROM drive installation slot.
Page 6
Be sure to set the slide switch to N for use. (The position W is provided for service use only.) 7. How To Refit The Drive Storage Cover Always refit the drive storage cover before switching ON the JVC CD-ROM or CD/DVD Library. 1. Fasten the cover with the screws that were removed in the procedure ( 2 -1).
The library is a MC-2200U/2200PU/2600U/2600PU CD-ROM Library and has the last four digits of the serial number as follows. • MC-2200U: 0092 or after. • MC-2200PU: 0081 or after. • MC-2600U: 0387 or after. • MC-2600PU: 0061 or after. For the ROM replacement method, please consult your dealer or nearest JVC-authorized service agent. SPECIFICATIONS Applicable discs...