Table of Contents
Advertisement
Connecting the CS
1.
Connect the cable from the PBX to the CS.
KX-T0155/KX-TDA0156
RJ11 Modular
To PBX
2.
Pass the cable through the groove of the CS (in any direction depending on your preference).
KX-T0155/KX-TDA0156
To PBX
Registering the PS
The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is required.
A Proprietary Telephone (PT) with multiline display (e.g., KX-T7636 6-line display) is required to perform the
PBX system programming.
Note
For details about system programming using a PT, refer to "PT Programming" in the Feature Manual,
and "PT Programming" in the PT Programming Manual for your PBX.
Entering the System Programming Mode
PT (Administrator Level)
PROGRAM/
PAUSE
Document Version 2009-12
KX-T0158
To PBX
KX-T0158
To PBX
System Password for Administrator—
#
for PT Programming
1234
7 Connecting a Cell Station to the PBX
RJ45 Modular
Programming No.
3 digits
Quick Installation Guide
37
Hide quick links:
Advertisement
Table of Contents
