Panasonic KX-T0155 Quick Installation Manual page 31

Note
•
The no. 3, 4, 5 and 6 pins (Master) of the CS must be connected to 2 pairs of pins on the DHLC/
DLC card.
•
When connecting multiple KX-T0158 CSs to a DHLC/DLC card, make sure that the no. 3, 4, 5 and
6 pins (Master) of adjacent CSs are at least 2 pairs of pins away on the card.
•
For details about the DHLC/DLC card, refer to the Installation Manual for your PBX.
•
The Local Processor (LPR) software of the DHLC/DLC card used must be version 5.000 or later.
If necessary, upgrade the LPR software of the DHLC/DLC card. To confirm the LPR software
version of the card, refer to "Configuration—Slot—Summary" in the PC Programming Manual for
your PBX.
•
CS connections must be made within the same DHLC/DLC card.
•
When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed.
Check the connection of CS and the PBX using the Maintenance Console. For information about
how to view CS information using the Maintenance Console, refer to "Utility—CS Information" in
the PC Programming Manual for your PBX.
Document Version 2009-12
7 Connecting a Cell Station to the PBX
Quick Installation Guide 31